Articles Tagged with LFIT V40

Disassociation Failures in Stryker LFIT V40 Artificial Hips

Published on: January 29, 2024 | By Clay Hodges

For a while now, Stryker has had issues with some of its hip replacement artificial implants. One troublesome type in particular has been the LFIT V40 series. Specifically, in some of these Stryker hips corrosion forms where the femoral head connects with the femoral stem. This would often lead to taper lock failure, or a compromised joint that would loosen and cause metallosis.

This issue helped lead to a recall in 2016 and an expanded recall in 2018. One of the reasons for the 2018 recall was a higher-than-expected number of reports of the femoral head disassociating (disconnecting) from the femoral stem.

What Is Artificial Hip Disassociation?

Artificial Hip Lawsuits 2019 Update: Smith & Nephew, Stryker, DePuy

Published on: July 23, 2019 | By Clay Hodges

If you’re reading this you probably know that over the past decade thousands and thousands of lawsuits have been filed by people injured by defective artificial hips. Several manufacturers have been involved, and while a few companies have resolved claims and moved on, thousands of other artificial hip lawsuits remain in courts across the country. Let’s take a look at active litigation involving artificial hips:

Smith & Nephew Birmingham Hip

The Smith & Nephew “Birmingham” hip litigation is in full-swing. Plaintiffs in this litigation allege they were injured after receiving a Birmingham Hip Resurfacing (BHR) device, or a total hip arthroplasty (THA) utilizing Birmingham Hip components. In the resurfacing procedure, the hip ball bone is shaped and resurfaced with a smooth metal covering and a metal shell is implanted into the hip socket, thus creating a metal-on-metal connection. Smith & Nephew uses cobalt and chromium to construct both of these resurfacing components. These metals have been shown to wear away and move into the blood and tissue of the patient, causing all kinds of symptoms and problems.

Settlement Reached in Stryker LFIT V40 Femoral Head Hip Litigation

Published on: November 9, 2018 | By Clay Hodges

Stryker Orthopaedics has announced that it reached a national settlement in the multidistrict litigation focused on the Stryker LFIT V40 femoral head. The LFIT V40 femoral head is one component of Stryker’s artificial hip system. This settlement announcement is a bit surprising, as the MDL was created for the LFIT V40 femoral head in April 2017. As medical device multidistrict litigation goes, this is a very quick path from formation of the MDL to settlement. One reason for the speed is that this MDL is smaller than other artificial hip MDLs based on the number of injured plaintiffs. The LFIT V40 settlement involves approximately 125 cases in the federal court MDL and an additional 140 cases in New Jersey state court.

In any event, for those people hurt by the LFIT V40 femoral head, this is good news. The terms of the settlement have not been released. I will certainly update this website when the settlement agreement is made available. As for now, all discovery and trial preparation have been stayed (or stopped). The first bellwether trial, scheduled for September 2019, will be removed from the trial calendar. The focus now will be on processing individual settlements for plaintiffs.

Remember that each plaintiff in this or any other medical device litigation is not required to accept the settlement. Although it is often reasonable for the plaintiff to accept the terms of settlement, no plaintiff will be compelled to accept any settlement. As with any litigation, it is important for individual plaintiffs and their attorneys to slow down, review all the terms of settlement, and make a careful decision on whether to participate in the settlement.

The Taper Lock Failure in the Stryker LFIT V40 Artificial Hip

Published on: September 8, 2017 | By Clay Hodges

The vast majority of artificial hip failures over the past decade involved metal-on-metal (MoM) hip components. These medical devices were meant to revolutionize the artificial hip market. Specifically, the all-metal hip components were intended to last a long time, and much longer than older generation artificial hips using materials like ceramics and plastics, which had a tendency to wear down and “fail” after twelve or fifteen years. Beyond that, the metal-on-metal artificial hips were touted to withstand the rigors of active, athletic patients. It sounded like a terrific advancement in the development of artificial hips. The problem is, the metal-on-metal design did not work, in many cases because the metal acetabular cup and the metal femoral head would grind together day after day, month after month, releasing harmful metal debris (metallosis) into the patient’s body. Far too many people were forced to get revision surgeries a few years after the implant surgery to remove the metal hips.

It turned out to be a disaster for thousands of patients and for several large medical device manufacturers. Depuy and Zimmer, to name just two companies, faced thousands of lawsuits from people injured by the metal-on-metal artificial hips. Many of those cases are resolved or resolving, but many more await settlement or jury trials.

The LFIT V40 Is a Metal-on-Polyethylene Artificial Hip

★★★★★

I was involved in a case for the faulty hip replacements. Clay Hodges represented me. I can't say enough about how much he has helped me. Clay was able to win multiple settlements on my behalf with most of them being the maximum amount able to be awarded. Matt J.

Clay, thank you sir for making a disheartening experience at least palatable, you and your staff were honest, caring and understanding through the entire process of my wife’s hip replacements, while monetary settlements never make the pain and suffering end, it sometimes is the only way people can fight back to right a wrong. J. V.

We are absolutely pleased with how Clay Hodges handled my husband’s hip replacement claim. He always kept us informed of the progress. And, his work resulted in a settlement which we are extremely pleased. Thank you, Clay! Carol L. & Norm L.